Download Print this page

HP ProCurve MSM410 Quick Start Manual

Hide thumbs

Advertisement

The MSM410 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g and
802.11n draft 2.0 product. Draft 2.0 refers to the version of the not-yet-ratified
IEEE 802.11n standard used in Wi-Fi Alliance testing as of June 2007. The Wi-
Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
This Quickstart shows you how to get started using the MSM410 Access Point (US J9426A, WW J9427A).
After reading this Quickstart, you can visit www.procurve.com/manuals and download documents of particular interest such as the MSM3xx / MSM4xx Access
Points Management and Configuration Guide and the MSM7xx Controllers Management and Configuration Guide.

Hardware overview

Package contents
MSM410 with detachable mounting bracket and two mounting screws with wall anchors.
Ports
Ethernet port: Auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45 connector.
The port supports Power over Ethernet (PoE) 802.3af.
Console port: Standard console (serial) port with an RJ-45 connector. For details, see
the MSM410 console port description in the MSM3xx / MSM4xx Access Points
Management and Configuration Guide
MSM410 Access Point Quickstart
Status lights
(left to right)
Power, Ethernet,
Radio
Lock tab
Ethernet port (Port 1)
Never connect the Console port to an Ethernet switch or PoE power source.
Warning:
This may damage the MSM410. Connect it only to other serial ports via an
RJ-45 to DB-9 adapter or equivalent.
Radios and antennas
The MSM410 contains an integrated single 802.11n Draft 2 compliant radio with an internal
three-element, dual-band, MIMO antenna.
Cable channel
Mounting bracket
tab slots
Console port

Advertisement

loading

  Summary of Contents for HP ProCurve MSM410

  • Page 1: Hardware Overview

    The MSM410 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g and 802.11n draft 2.0 product. Draft 2.0 refers to the version of the not-yet-ratified IEEE 802.11n standard used in Wi-Fi Alliance testing as of June 2007. The Wi- Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. MSM410 Access Point Quickstart This Quickstart shows you how to get started using the MSM410 Access Point (US J9426A, WW J9427A).
  • Page 2: Reset Button

    Reset or power cycle the MSM410. If this • Autonomous mode: Once switched to autonomous mode, the MSM410 operates as a condition persists, contact HP ProCurve Customer Care. stand-alone AP. An autonomous MSM410 is configured and managed via its web-based The MSM410 is fully operational.
  • Page 3: Installation

    A 10/100 or 10/100/1000 PoE-enabled switch. Various PoE-enabled switches are available from HP ProCurve. • An HP ProCurve PoE 1-Port Power Injector (J9407A). If the MSM410 will be powered by a user-supplied PoE power injector, use Caution: only a gigabit-compatible power injector. PoE injectors designed for 10/100...
  • Page 4: Initial Configuration (Autonomous Mode)

    MSM410 Access Point Quickstart HP ProCurve Networking Mounting on a suspended ceiling Wireless Security Caution: For initial-configuration convenience, a factory-default MSM410 that has been switched The MSM410 can be mounted on a suspended ceiling with user-supplied T-bar clips or to autonomous mode has all wireless security options disabled. It is strongly the equivalent.
  • Page 5 Windows XP users may have to install a patch available from Microsoft. Connect to the wireless network. By default the MSM410 creates a wireless network named HP ProCurve. For example, from the Windows XP Start menu, select Settings > Network Connections > Wireless Network Connections. Select HP ProCurve and then Connect.
  • Page 6 MSM410 Access Point Quickstart HP ProCurve Networking Notice This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe A est conforme à...