Radius-Server Retransmit; Radius-Server Timeout - HP ProCurve 420 Management And Configuration Manual

Default Setting
DEFAULT
Command Mode
Global Configuration
Example
HP420(config)#radius-server key green
HP420(config)#

radius-server retransmit

This command sets the number of retries.
Syntax
radius-server [secondary] retransmit <number_of_retries>
secondary - Secondary server.
•
• number_of_retries - Number of times the access point will try to
authenticate logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
3
Command Mode
Global Configuration
Example
HP420(config)#radius-server retransmit 5
HP420(config)#

radius-server timeout

This command sets the interval between transmitting authentication requests
to the RADIUS server.
Syntax
radius-server [secondary] timeout <number_of_seconds>
secondary - Secondary server.
•
Command Line Reference
RADIUS Client
6-45