Show Interface Wireless G - HP ProCurve 420 Management And Configuration Manual

Command Line Reference
Interface Commands
6-86
Default Setting
v2.0.37 software or earlier: Interface enabled
v2.0.38 software or later: Interface disabled
Command Mode
Interface Configuration (Wireless)
Example
HP420(if-wireless g)#shutdown
HP420(if-wireless g)#

show interface wireless g

This command displays the status for the wireless interface.
Command Mode
Exec
Example
HP420#show interface wireless g
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description
SSID
Radio mode
Channel
Status
----------------802.11 Parameters--------------------------
Transmit Power
Max Station Data Rate
Multicast Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
DTIM Interval
Preamble Length
Slot time
Maximum Association
: Enterprise 802.11g Access Point
: Enterprise Wireless AP
: 802.11b only
: 9
: Enabled
: HALF (18 dBm)
: 24Mbps
: 2Mbps
: 1024 bytes
: 2000 bytes
: 60 TUs
: 8 beacons
: SHORT
: SHORT
: 64 stations