Configuring Security Settings - HP ProCurve 420 Management And Configuration Manual

Using the HP Web Browser Interface
Tasks for Your First HP Web Browser Interface Session
N o t e
Figure 4-7. IP Configuration
4-14
5. Enter the IP address for the primary and secondary DNS servers to be
used for host-name to IP address resolution.
6. Click the
[Apply Changes]
If you change the IP address using the web interface, you must log in again
using the new address.

Configuring Security Settings

The access point is configured by default as an "open system," which broad-
casts a beacon frame including the configured SSID. Wireless clients can read
the SSID from the beacon. If the "closed system" option is selected when
configuring the access point, the SSID is not broadcast in the beacon frame.
button.