Setting The Radio Channel - HP ProCurve 420 Management And Configuration Manual

Figure 4-4. Setting the SSID
N o t e

Setting the Radio Channel

The access point's radio channel settings are limited by local regulations,
which determine the number of channels that are available. You can manually
set the access point's radio channel or allow it to automatically select an
unoccupied channel.
If you are using the worldwide product, J8131A, before configuring radio
settings on the access point, you must first use the CLI to set the Country Code
so that the radio channels used conform to your local regulations. See "Using
the CLI to Set the Country Code" on page 5-58.
Using the HP Web Browser Interface
Tasks for Your First HP Web Browser Interface Session
4-11