HP ProCurve 420 Management And Configuration Manual page 104

Access Point Configuration
Configuring RADIUS Client Authentication
5-46
To display the current RADIUS server settings from the Exec level, use the
show radius command, as shown in the following example.
HP420#show radius
========================================
Radius MAC Address Format:
Radius VLAN ID Format:
Radius Server Information
========================================
IP : 10.1.2.25
Port : 1812
Key : *****
Retransmit : 5
Timeout : 10
========================================
Radius Secondary Server Information
========================================
IP : 10.1.1.103
Port : 1812
Key : ****
Retransmit : 3
Timeout : 5
========================================
HP420#
SINGLE_DASH
ASCII