Delete - HP ProCurve 420 Management And Configuration Manual

C a u t i o n ­
Example
The following example shows how to upload the configuration settings to a
file on the TFTP server:
HP420#copy config tftp
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
HP420#
The following example shows how to download a configuration file:
HP420#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>:
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
HP420#

delete

This command deletes a software or configuration file.
Syntax
delete filename
filename - Name of the configuration or software file.
Default Setting
None
Command Mode
Exec
Beware of deleting software files from flash memory. At least one software
file is required in order to boot the access point. If there are multiple software
files in flash memory, and the one used to boot the access point is deleted, be
sure you first use the bootfile command to update the software file booted at
startup before you reboot the access point. See"Downloading Access Point
Software" on page A-3 for more information.
Command Line Reference
Flash/File Commands
[1]:2
6-41