Show Snmp-Server - HP ProCurve 420 Management And Configuration Manual

Command Line Reference
SNMP Commands
HP420#show snmp-server
SNMP Information
==============================================
Service State
Community (ro)
Community (rw)
Location
Contact
EngineId :80:00:07:e5:80:00:00:2e:62:00:00:00:18
EngineBoots:1
Trap Destinations:
1: 192.168.1.9, Community: *****, State: Enabled
2: 0.0.0.0, Community: *****, State: Disabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
systemDown
dot11StationAssociation
dot11StationReAssociation
dot1xAuthFail
dot1xAuthSuccess
dot1xMacAddrAuthSuccess
iappStationRoamedFrom
localMacAddrAuthFail
configFileVersionChanged
dot11InterfaceFail
=============================================
HP420#
6-38

show snmp-server

This command displays the SNMP configuration settings.
Command Mode
Exec
Example
: Enable
: *****
: *****
: WC-19
: Paul
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
dot11StationAuthentication
dot11StationRequestFail
dot1xAuthNotInitiated
dot1xMacAddrAuthFail
iappContextDataSent
iappStationRoamedTo
localMacAddrAuthSuccess
radiusServerChanged
sntpServerFail
systemUp Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled