Mac-Authentication Server - HP ProCurve 420 Management And Configuration Manual

Command Mode
Global Configuration
Command Usage
• Software version 2.0.37 or earlier supports up to only 256 MAC
addresses in the local filter table. Software version 2.0.38 or later
supports up to 1024 MAC addresses.
• An active MAC address entry in the filter table may be allowed or
denied access depending on the global setting configured for the table
using the mac-access permission command.
Example
HP420(config)#address filter entry 00-70-50-cc-99-1a allowed
HP420(config)#
Related Commands
mac-access permission (page 6-52)
show authentication (page 6-54)

mac-authentication server

This command sets address filtering to be performed with local or remote
options. Use the no form to disable MAC address authentication.
Syntax
mac-authentication server [local | remote]
local - Authenticate the MAC address of wireless clients with the
•
local authentication database during 802.11 association.
• remote - Authenticate the MAC address of wireless clients with the
RADIUS server.
Default
local
Command Mode
Global Configuration
Command Usage
The access point does not support a security combination of RADIUS
MAC authentication and WPA with 802.1X or WPA pre-shared key.
Command Line Reference
Authentication
6-53