Filter Ap-Manage; Filter Ethernet-Type Enable - HP ProCurve 420 Management And Configuration Manual

Example
HP420(config)#filter local-bridge
HP420(config)#

filter ap-manage

This command prevents wireless clients from accessing the management
interface on the access point. Use the no form to disable this filtering.
Syntax
filter ap-manage
no filter ap-manage
Default
Disabled
Command Mode
Global Configuration
Example
HP420(config)#filter ap-manage
HP420(config)#

filter ethernet-type enable

This command checks the Ethernet type on all incoming and outgoing
Ethernet packets against the protocol filtering table. Use the no form to disable
this feature.
Syntax
filter ethernet-type enable
no filter ethernet-type enable
Default
Disabled
Command Mode
Global Configuration
Command Line Reference
Filtering Commands
6-57