Show Logging - HP ProCurve 420 Management And Configuration Manual

Command Line Reference
System Management Commands
6-18
Command Usage
The command specifies the facility type tag sent in Syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by
the access point. However, it may be used by the Syslog server to sort
messages or to store messages in the corresponding database.
Example
HP420(config)#logging facility 19
HP420(config)#

show logging

This command displays the logging configuration.
Syntax
show logging
Command Mode
Exec
Example
HP420#show logging
Logging Information
============================================
Syslog State
Logging Host State
Logging Console State
Server Domain name/IP
Logging Level
Logging Facility Type
=============================================
HP420#
: Disabled
: Enabled
: Disabled
: none
: Error
: 16