Cli: Configuring Security Settings - HP ProCurve 420 Management And Configuration Manual

Figure 5-19. The Auth. Servers Window 802.1X Setup

CLI: Configuring Security Settings

CLI Commands Used in This Section
Command Syntax
interface <ethernet | wireless g>
key-length-wep <64 | 128 | 152>
transmit-key-wep <index>
[no] wep-key <index> <type> <value>
security-suite <wizard | open-system | shared-key>
<wpa-disabled | wpa-required | wpa-supported>
<802.1x-disabled | 802.1x-required | 802.1x-supported
| psk> <wep | wep-tkip | tkip-tkip | aes-aes>
Access Point Configuration
Configuring Wireless Security
CLI Reference Page
page 6-62
page 6-80
page 6-81
page 6-80
page 6-82
5-81