Ssid - HP ProCurve 420 Management And Configuration Manual

Command Line Reference
Interface Commands
6-72
• For most wireless adapters, the channel for wireless clients is auto­
matically set to the same as that used by the access point to which it
is linked.
Example
HP420(if-wireless g)#channel 1
HP420(if-wireless g)#

ssid

This command configures the Service Set IDentifier (SSID).
Syntax
ssid <string>
string - The name of a basic service set supported by the access point.
(Range: 1 - 32 characters)
Default Setting
Enterprise Wireless AP
Command Mode
Interface Configuration (Wireless)
Command Usage
Clients that want to connect to the network via the access point must set
their SSIDs to the same as that of the access point.
Example
HP420(if-wireless g)#ssid RD-AP#3
HP420(if-wireless g)#