Radio-Mode - HP ProCurve 420 Management And Configuration Manual

Command Mode
Exec
Example
HP420#show interface ethernet
Ethernet Interface Information
========================================
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Speed-duplex
Admin status
Operational status
========================================
HP420#

radio-mode

This command sets the working mode for the wireless interface.
Syntax
radio-mode <b | g | b+g>
b - b-only mode: Both 802.11b and 802.11g clients can communicate
•
with the access point, but 802.11g clients can only transfer data at
802.11b standard rates (up to 11 Mbps).
g - g-only mode: Only 802.11g clients can communicate with the access
•
point.
b+g - b & g mixed mode: Both 802.11b and 802.11g clients can commu­
•
nicate with the access point.
Default Setting
b & g mixed mode
Command Mode
Interface Configuration (Wireless)
Example
HP420(if-wireless g)#radio-mode g
HP420(if-wireless g)#
: 192.168.1.1
: 255.255.255.0
: 192.168.1.253
: 192.168.1.55
: 10.1.0.55
: 100Base-TX Half Duplex
: Up
: Up
Command Line Reference
Interface Commands
6-67