Closed-System - HP ProCurve 420 Management And Configuration Manual

Command Mode
Interface Configuration (Wireless)
Example
HP420(config)#interface wireless g
HP420(if-wireless g)#description RD-AP#3
HP420(if-wireless g)#

closed-system

This command closes access to clients without a pre-configured SSID. Use the
no form to disable this feature.
Syntax
closed-system
no closed-system
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Command Usage
When closed system is enabled, the access point will not include its SSID
in beacon messages. Clients with a configured SSID of "any" will not be
able to associate with the access point.
Example
HP420(if-wireless g)#closed-system
HP420(if-wireless g)#
Command Line Reference
Interface Commands
6-69