Show Station - HP ProCurve 420 Management And Configuration Manual

----------------Security-----------------------------------
Closed System
802.11 Authentication
WPA clients
802.1x
Encryption
**[WEP key]***********************************************
Key Length
Default Transmit Key
Cipher
WEP Key Data Type
Static Keys :
Key 1: EMPTY Key 2: EMPTY
**[WPA key]***********************************************
WPA mode
Multicast cipher
Unicast cipher
Pre-shared Key Data Type
----------------Antenna-----------------------------------
Antenna mode
Antenna gain attenuation
Low channel
Mid channel
High channel
===========================================================
HP420#

show station

This command shows the wireless clients associated with the access point.
The "Station Address" displayed is the client's MAC address.
Command Mode
Exec
Example
HP420#show station
802.11g Station Table
Station Address
Authenticated
Associated
Forwarding Allowed
HP420#
: DISABLED
: OPEN
: SUPPORTED
: DISABLED
: DISABLED
: --------
: 1
: WEP
: Hexadecimal
Key 3: EMPTY
: Dynamic key
: WEP
: TKIP
: Hexadecimal
: Diversity
: 80%
: 63%
: 70%
: 00-04-E2-41-C2-9D
: TRUE
: TRUE
: TRUE
Command Line Reference
Interface Commands
Key 4: EMPTY
6-87