Sor-Screen Orientation; Sps-Splash Screen; Sst-Status - Christie Crimson Technical Reference

Examples
Set the SNMP read community name to public:
(SNM+READ "public")
Configure one of the client IPs to receive traps:
(SNM+TIP1 "192.168.1.25")
Disable power state traps:
(SNM+POWR 0)
SOR–Screen Orientation
Selects the orientation of the displayed image.
Commands
Command Description
SOR <value> Changes the orientation of the displayed
image. This command is only available if
video electronics are on. (Saved value)
SPS–Splash Screen
Changes the characteristics of the displayed splash screen when no signal is present.
Commands
Command Description
SPS+COLR <value> Changes the background color of the splash screen. This command
is only available when video electronics are on. (Saved value)
SST–Status
Returns status information about the projector in read-only mode.
For more information about the status groups, items, and theirs state, see the Crimson Crimson and
Mirage Status System Guide (P/N: 020-102661-XX).
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Front projection (Default)
1 = Rear projection
2 = Front projection inverted
3 = Rear projection inverted
Values
1 = Red
2 = Green
3 = Blue
7 = Black (Default)
46