Examples; Edge Blending (Ebl); Error Message Enable (Eme) - Christie Mirage WQ-L User Manual

• Access Level: Operator

Examples

Set 3D dark interval to 0 on main video
DRK 0
Set 3D dark interval to 3.00 milliseconds
DRK 300

Edge Blending (EBL)

EBL
Configuration/Preference
CONTROL GROUP:
Description
This serial command controls edge blending settings.
Subcode
SLCT
Examples:
(EBL+SLCT0) - Edge blending disabled.
(EBL+SLCT2) - Use TWIST edge blending map #1.

Error Message Enable (EME)

EME
Preference
CONTROL GROUP:
Description
This control enables the displaying of error messages, and determines to which interface the messages are sent.
Error messages can be turned Of or can be sent out the serial port. This setting does not affect messages for
invalid user entries, for which error messages are always displayed.
Valid values are:
• 0 = Off
• 2 = Serial ports
Subcode
<No Subcode >
EXAMPLE:
(EME ?) Get current Error Message Enable state. 
(ESM ?) Set Error Message Enable to send errors out serial ports.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
SUBCLASS:
Description of Use
Select edge blending mode:
0 = disabled
2 to 17 = select TWIST edge blending maps
Power Down
SUBCLASS:
Description of Use
Serial Command Reference
Power Up
ACCESS LEVEL:
Operator
ACCESS LEVEL:
Operator
81