Table of Contents
Advertisement
1. From the Main menu, select ArrayLOC > Array Color Target.
2. From the Target Color Space drop-down list, select a user-defined color space. Once selected
the last saved red/green/blue/xy values associated with the selection are displayed.
3. Target Red x/y, Target Green x/y, Target Blue x/y displays the color values associated
with the selected target color space. Only values for user defined color spaces (User 1 through
4) can be changed. Changes to these values update the associated color space chromaticity. To
use another color space as a starting point, select a source color space from the Copy Color
Space From list. When Target Color Space is set to Maximum, the values reflect a color
space larger than capable for the best array color saturation. The values may not reflect real-
world colors
• ColorLOC Status displays ColorLOC warnings and errors.
• Array Capability indicates the current projector capability with respect to the selected color
target and the target white point. The information format is:
• R/G/B: Indicates the percentage achieved of the red, green, and blue target gamut.
• W: Indicates the percentage achieved of the product of the RGB brightness, and the target
brightness.
4. To set the white point for the array using one of the following methods:
•
Select a user-defined white point from the Select White Point drop-down list. Changing
this option un checks the Set White to Color Temperature check box and updates the
Target White x/y values and the White Color Temperature.
Target White x/y displays the white x/y values associated with the Select White
Point option. Only values for user defined white points (User White 1 through 4) can be
changed. When Set White Color to Color Temperature is checked, the values are
calculated based on the specified White Color Temperature.
•
Check the Set White to Color Temperature check box to recalculate Target White x/
y values based on the specified standard White Color Temperature. This option is
available only when Select White Point is set to one of the user-defined options, User
White 1 through 4. This option is unchecked automatically when you change the Select
White Point option.
Copy White Point From updates the Target White x/y values based on the white point
selected from the list. This option is available only when the Select White Point option is set
to one of the user-defined options, User White 1 through 4.
5. From the Copy Color Space From drop-down list select a user-defined color space. The
Target Red x/y, Green x/y, Blue x/y values are updated based on the color space selected
from the list. This option is available only when Target Color Space is set to one of the user-
defined options, User 1 though 4.
6. To adjust the target brightness for the array, adjust RGB Brightness Target on the master
projector. For maximum brightness, set the value to a large number, such as 40,000.
7. If the array appears matched across all projectors for color and brightness, color setup is
complete.
If further adjustment is required, see
on page 45.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Fine-tune Whites, White Brightness, or Primary Colors
Operation
44
Advertisement
Table of Contents
