Active Projector (Apj); Auto Power Up (Apw) - Christie Mirage WQ-L User Manual

Active Projector (APJ)

APJ
Input
CONTROL GROUP:
Description
Temporarily enable or disable the IR and wired keypad Inputs to a specific projector in a network of projectors.
When a projector is disabled, the only key that works is PROJ. The next time the projector is powered up again, it
will revert to fully enabled. The built-in keypad will always be fully functional. This control does not overwrite the
Front IR, Back IR and Wired Keypad settings.
Subcode
<No Subcode >
Examples:
(APJ 1) Projector is active (keypads are enabled). 
(APJ 0) Projector is not active (keypads are temporarily disabled). 
(APJ?) Is the projector keypad active or not.

Auto Power Up (APW)

APW
Preference
CONTROL GROUP:
Description
When the A/C switch is turned ON, the projector will automatically change from Stand-by Mode to Power ON
Mode. The projector will switch the lamp(s) on without waiting for further user actions.
Subcode
<No Subcode >
Examples:
(APW 0) Projector will remain in Standby Mode until the user presses the power key. 
(APW 1) Projector will auto power up when A/C power is switched On.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Down
SUBCLASS:
Description of Use
Set 0 to temporarily disable keypad access to this projector.
Power Down
SUBCLASS:
Description of Use
Set to 1 to enable.
Serial Command Reference
Operator
ACCESS LEVEL:
Operator
ACCESS LEVEL:
76