Emitter Delay (Tdd); Parameters - Christie Mirage WQ-L User Manual

TCS
4
C
Subcode
SLCT
RDxX
RDxY
GNxX
GNxY
BLxX
BLxY
COPY
CCAP
Examples:
(TCS+SLCT 1) Select EBU color gamut as target. 
(TCS+RDCX 290) Set current Target gamut red x point to 0.290.
(TCS+BLEY ?) Return value of EBU preset blue y point.
(TCS+COPY 3) Copy settings from HD Video to current.
3D Emitter Delay (TDD)
Adjust the output 3D emitter delay to match the active glasses to the L/R frames of the projector.
Proper adjustment of this delay will eliminate cross talk and odd colors caused by timing differences
between the glasses and the projected image. The user specified delay is added after sync locking.

Parameters

• Control Group: Preference
• Subclass: Power Up
• Access Level: Operator
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
User 4
Alias to selected table
Description of Use
Selects the color space preset:
0 = Max drives (M) 5 = User 1 (1)
1 = EBU (E) 6 = User 2 (2)
2 = SD Video (S) 7 = User 3 (3)
3 = HD Video (H) 8 = User 4 (4)
4 = Factory (F)
Adjusts the x coordinate of the red color point (0 - 800 with three decimal
places)
Adjusts the y coordinate of the red color point (0 - 800 with three decimal
places)
Adjusts the x coordinate of the green color point (0 - 800 with three decimal
places)
Adjusts the y coordinate of the green color point (0 - 800 with three decimal
places)
Adjusts the x coordinate of the blue color point (0 - 800 with three decimal
places)
Adjusts the y coordinate of the blue color point (0 - 800 with three decimal
places)
Copy gamut settings from preset to current. Value 0-8 for source preset
Read-only field which returns string that gives relationship between projector
capability and the color target.
Serial Command Reference
101