Adjust Software to Optimize Image
Unless otherwise indicated, instructions apply to all projector models in stand-alone or
multi-projector configurations.
1. Display an external signal.
2. Select Screen Image Orientation in Configuration > Output Options and change the
orientation of the displayed image to suit the installation.
3. Assign projector ID number(s).
See
Projector Address
4. Make sure that ArrayLOC is enabled. From the Main menu select ArrayLOC and select Enabled
from the Bright/ColorLOC Mode drop-down list. ArrayLOC automatically adjusts projector
colors and brightness.
5. Adjust ArrayLOC color target.
See
Adjust Projected White and Primary Colors for the Array
6. Fine-tune ArrayLOC to compensate for system optics.
See
Fine-tune Projector Colors with a Color Meter
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
on page 50.
on page 43
on page 46.
Installation
29