Subcode
SRC4
SRC5
SRC6
SRC7
Read/Write
Yes
Examples
Command
(SNS+SRC1"WUXGA")
Miscellaneous Commands
Projector Status (SST)
Use this command to query the status of the projector.
Subcode
None
Read/Write
Read only.
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Applies a new name to the HDMI2 input.
Applies a new name to the component input.
Applies a new name to the S-video input.
Applies a new name to the video input.
Changes the source name to WUXGA from VGA1.
Description
Description
Commands
64