Sps-Splash Screen; Sst-Projector Status - Christie Boxer 30 Technical Reference

SPS–Splash Screen
Changes the characteristics of the displayed splash screen when no signal is present.
Commands
Command Description
SPS+COLR <value> Changes the background color of the splash screen. This command
is only available when video electronics are on. (Saved value)
Examples
Set the splash screen to blue:
(SPS+COLR 3)
SST–Projector Status
Returns status information about the projector in read-only mode.
Status items for Boxer 30 are organized in the following groups:
Status group
Alarm (SST+ALRM?)
Configuration (SST+CONF?)
System (SST+SYST?)
Signal (SST+SIGN?)
Lamp (SST+LAMP?)
Version (SST+VERS?)
Temperature (SST+TEMP?)
Cooling (SST+COOL?)
Serial (SST+SERI?)
For more information about the status groups, items, and their states, see the Boxer 30 Status
System Guide (P/N: 020-102233-XX).
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Displays any status items not in the OK state. This group contains a dynamic
number of status items. If everything in the projector is OK, this group is
empty.
Displays values and fault conditions for configuration-related items.
Displays values and fault conditions relating to the system and its health.
Displays values and fault conditions relating to the video signal status. (Read-
only)
Displays values and fault conditions for lamp-related items. (Read-only)
Displays values and fault conditions related to software and hardware versions.
(Read-only)
Displays values and fault conditions for temperature-related items. (Read-only)
Displays values and fault conditions related to cooling and fans. (Read-only)
Displays values and fault conditions related to hardware serial numbers.
(Read-only)
Serial API commands
Values
1 = Red
2 = Green
3 = Blue
7 = Black (Default)
56