System Group (Sst+Syst?) - Christie Crimson Series Technical Reference

# Status
1 Projector S/N
2 Output Resolution
3 Projector Build Date

System Group (SST+SYST?)

The System Group provides values and fault conditions relating to the system and its health for
Crimson.
# Status
0 Projector Hours
1 Pitch/Roll
Crimson and Crimson Mirage Technical Reference–Status System
020-102661-04 Rev. 1 (07-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
State Value
Unknown
Jig Mode
<serial number>
Unknown
<horizontal>x<vertical>
<YYYY>/<MM>/<DD>
Unknown
State Value
<hours>:<minutes>
N/A
<pitch value>/<roll
value>
Communication Fault
Crimson status system
Description
Cannot retrieve the model information.
Reserved for engineering use.
Displays the serial number of the
projector.
The storage device containing the
information is inaccessible or the data on
the device is corrupted.
Displays the native output resolution of
the projector.
Displays the build date of the projector.
The storage device containing the
information is inaccessible or the data on
the device is corrupted.
Description
Displays the total amount of time that
the projector has been on (including
warm up and cool down times).
This does not include the amount of time
required to cool down the electronics
when turning off the Keep Electronics on
in Standby option while the projector is
already in standby.
Cannot retrieve or update the value.
Provides the physical orientation of the
projector:
• A negative pitch means that the
projector is pointing down.
• A negative roll means the projector
is tilted counter clockwise as seen
from the rear.
Information is not available due to a
hardware fault.
6