Table of Contents
Advertisement
Description Of Control Types
Subclasses
•
Power Down Controls: These controls are accessible when the projector is in Standby power
mode (i.e. power off) as well as when powered on.
•
Power Up Controls: These controls are only accessible when the system electronics are fully
powered (not necessarily lamp on).
Control Groups
•
Unsaved Controls: These controls are not saved to flash. The settings are not maintained
between power sessions.
•
Saved Controls: These controls are saved to flash. The settings are persistent between power
sessions.
•
Preference Controls: These controls are transferable from one projector to another. Example:
NET+SUB0 (projector subnet).
•
Configuration Controls: These controls are projector specific settings. They are non-
transferable between projectors. Example: NET+ETH0 (projector IP address).
Access Levels
•
Operator: Command is available at the operator level log in.
•
Advanced: Command is available at the advanced operator level log in.
•
Admin: Command is available at the administrator level log in.
•
Service: Command is available at the service level log in.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Serial Communication
72
Advertisement
Table of Contents
