Table of Contents
Advertisement
5. Click Upgrade.
If the Upgrade button is greyed out the projector may not be in Standby mode. Select the
Main tab and look under the Power field to verify the current mode. If the projector is not in
Standby mode, power the project Off and try again.
6. To reboot the projector in Fail Safe mode, click Yes from the pop-up window.
7. The Fail Safe mode displays the current versions of the projector firmware.
8. To locate the upgrade file, click Browse. Double-click the file to select it.
9. To upload the file to the projector, click Upgrade. A progress bar indicates the status of the
upload. After a successful upload, the upgrade starts automatically.
•
The top two lines of the window display the current action.
•
The Upgrading progress bar indicates the status of the current action.
•
The upgrading process takes between 15 and 30 minutes.
10. Click Reboot to re-starts the projector in Normal mode.
If you are unable to see the WebUI after the upgrade delete the cache and cookies, and press
CTRL+F5.
If the message, Main update failed xxx, see log for details is displayed copy the upgrade log
and send it to Christie technical support.
Warp and Blend Images
The digital image warp and blend functionality combines multiple projector images into a single
image. Use the Christie's Twist
screen shapes. Adjustments can be made to correct keystone on flat screens or fit an image to
spherical, cylindrical, curved, or arbitrary screen shapes.
Digital blend definitions allow images from multiple projectors to be overlapped to create a single
image.
For information about creating and managing warps and blends, please refer to the Twist
Manual (P/N: 020-100143-xx) or the AutoCal 3.0 User Manual (P/N: 020-100985-xx).
Adjust Geometry Correction Settings
1. Select Configuration > Geometry Correction.
2. In the Geometry Correction list select the warp file previously uploaded to the projector from
TM
Twist
or AutoCal.
It can take several seconds to load a warp file.
3. In the Edge Blending list, select the edge blending file.
4. In the Black Blend Enable list, select the black blend file (supported with Twist
5. To visualize the effect of the selected warp or blend file, select a projector test pattern from the
Test Pattern list.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
TM
and AutoCal applications to adjust the image so it fits different
Operation
TM
User
TM
2.0).
53
Advertisement
Table of Contents
