Sst-Projector Status; Sth-Dynamic Black Strength; Syt-Sync Threshold - Christie DWU1612-HS Technical Reference

SST–Projector Status
Returns status information about the projector in read-only mode.
Commands
Command Description
SST? Returns all status items. (Read-only)
STH–Dynamic Black Strength
Sets the strength of the dynamic contrast adjustment.
Commands
Command Description
STH <value> Sets the strength of the dynamic contrast
adjustment. The higher the value, the
stronger the correction.
Examples
Set the strength of the dynamic contrast adjustment to strong:
(STH 3)
SYT–Sync Threshold
Helps to sync a hardware device, such as a DVD player, when connecting to a projector.
Only use this command with progressive signals.
Commands
Command Description
SYT <value> Sets the sync threshold.
Examples
Set the sync threshold to 50:
(SYT 50)
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
Values
0 to 3
2 (Default)
Values
0 to 100
50 (Default)
66