Sst-System Status - Christie CineLife+ 4 Series Technical Reference

SST–System Status
Retrieves the various system status groups.
To retrieve a single item, include the item index number (SST+SUBCODE?yy) where yy is the index
number of the item. The response to each command is a single message for each item, with the
format:
(SST+SUBCODE!yyy zzz "Status Text" "Status Description")
where
• yyy is the item index number
• zzz is the alert condition (0=Unknown, 1=OK, 2=Warning, 3=Critical Error, 4=Sensor Failure)
Parameters
• Access level: None
• Power level (minimum): Power Down
Commands
Command Description
SST? Returns information on all status groups, with one message
per item. (Read-only)
SST+ALRM? Returns a summary of any active alarms. (Read-only)
SST+COOL? Returns cooling data—cooling fans, air flow, and so on.
(Read-only)
SST+INTE? Returns interlock data. (Read-only)
SST+LAMP? Returns lamp operational data. (Read-only)
SST+LENS? Returns lens data. (Read-only)
SST+NTWK? Returns network configuration. (Read-only)
SST+SECU? Returns security data. (Read-only)
SST+SERI? Returns serial numbers. (Read-only)
SST+SYST? Returns system data—power, hours of use, shutter open, and
so on. (Read-only)
SST+TEMP? Returns temperature data. (Read-only)
SST+VERS? Returns version numbers. (Read-only)
SST+VIDO? Returns video related data. (Read-only)
Examples
Return the projector status:
(SST+ALRM?)
CineLife+ Technical Reference–Serial Commands
020-103075-05 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
CineLife+ serial commands
Values
Where parameters are:
P1 = Index number
P2 = Error level
P3 = Value
P4 = Description
Error level is:
001 = No errors or warnings
002 = Warning
003 = Critical error
26