Screen Orientation (SOR)
SOR
Preference
CONTROL GROUP:
Description
Selects the orientation of the displayed image. It can be displayed normally, inverted horizontally, inverted
vertically, or inverted in both directions, as required by the projector installation. Valid values are:
0 = Front Projection
1 = Rear Projection
2 = Front Projection Inverted
3 = Rear Projection Inverted
Subcode
<No Subcode >
Example:
(SOR 0) Set image orientation to Front projection.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Up
SUBCLASS:
Description of Use
Serial Command Reference
Operator
ACCESS LEVEL:
99