Table of Contents
Advertisement
Configuration Group (SST+CONF?)
The Configuration group provides values and fault conditions for configuration-related items in Christie
TruLife+.
#
Status
0
Projector Model
1
Projector S/N
2
Output Resolution
3
Projector Build Date
System Group (SST+SYST?)
The System group provides values and fault conditions relating to the system and its health for
Christie TruLife+.
#
Status
0
Projector Hours
1
Pitch/Roll
Christie TruLife+ Technical Reference–Status System
020-103327-03 Rev. 1 (04-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
State
Value
<projector model>
Unknown
Jig Mode
<serial number>
Unknown
<horizontal>x<vertical>
<YYYY>/<MM>/<DD>
Unknown
State
Value
<hours>:<minutes>
N/A
<pitch value>/<roll
value>
Christie TruLife+ status system
Description
Displays the model for the Christie TruLife
+ projector.
Cannot retrieve the model information.
Reserved for engineering use.
Displays the serial number of the
projector.
The storage device containing the
information is inaccessible or the data on
the device is corrupted.
Displays the native output resolution of
the projector.
Displays the build date of the projector.
The storage device containing the
information is inaccessible or the data on
the device is corrupted.
Description
Displays the total amount of time that
the projector has been on (including
warm up and cool down times).
This does not include the amount of time
required to cool down the electronics
when turning off the Keep Electronics on
in Standby option while the projector is
already in standby.
Cannot retrieve or update the value.
Provides the physical orientation of the
projector:
5
Advertisement
Table of Contents
