Fine-Tune Whites, White Brightness, Or Primary Colors; Configure Arrayloc - Christie Mirage WQ-L User Manual

Fine-tune Whites, White Brightness, or Primary Colors

The Projector Color Adjustment menu lets you fine-tune color or brightness for individual projectors
to accommodate any projector-specific optical elements (e.g. projection lens, fold mirrors, screen
properties or ambient lighting). The following steps outline color adjustments using projector color
settings until the colors appear to match the rest of the projectors in the array. Color adjustments
are evaluated by eye; however, a color meter can help determine the change required. For
information about using a color meter with this procedure, see
Color Meter on page 46.
1. From the Main menu, select ArrayLOC > Projector Color Adjustment.
2. Use the Target Color Space option to change the color space. Changing this option applies the
red/green/blue x/y values associated with the selected option. It also updates the red/green/
blue components of each color on this menu. Selecting one of the user-defined color spaces
displays the last saved adjustment values.
• The Target Color Space option is enabled only on the master projector. All other projector-
• ColorLOC Status displays ColorLOC warnings and errors.
3. Use the Red Part/Green Part/Blue Part of "x" options to make projector specific color
adjustments to the selected Target Color Space.
4. Use the Copy Adjustments From drop-down menu to copy the adjustment values from the
selected color space to the current color space.
Adjustments are specific to the target color space. If the color space is changed for the array,
projector adjustments can be copied from the old target color space and fine-tuned again.
5. Use the White Brightness Adjustment option to adjust the RGB brightness for the projector.
• If at any time you want to reset the color values to the color adjustment default values (0
• To reset the red part / green part / blue part of each color to the default values set at

Configure ArrayLOC

Select the projector-to-projector communication network configuration for all Ethernet messages
related to ArrayLOC functions, including ArrayLOC messages, and BCLOC messages. Make sure all
projectors in an array are operating on the same network, either the Control Network or the
ArrayLOC Network. See
1. From the Main menu, select ArrayLOC > ArrayLOC Configuration.
2. From the ArrayLOC Network drop-down list select from ArrayLOC Network or Control
Network.
3. Assign an ArrayLOC Group to the array. Only projectors in the same ArrayLOC group will
automatically achieve a common gamut and brightness.
4. Use the Synchronized keys, Test Pattern, Color Enable option to set the projector to listen
for remote keystrokes through the ArrayLOC network and the master projector. All
synchronized projectors respond to the same keystrokes. Double key strokes may not register
correctly, use alternate key commands instead.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
specific color adjustments on this menu are available on all projectors at all times.
or 100) select Clear Adjustments.
factory select the Reset Current Adjustments to Default option.
ArrayLOC Network Configuration
Fine-tune Projector Colors with a
on page 25.
Operation
45