Select Input (Sin) - Christie Mirage WQ-L User Manual

RTE
(RTE T 2009/01/01 23:00:00 2009/02/01 D 5 "description" "(PWR 1)") - power on the projector every fifth day
at 23:00:00, starting from January 1, 2009 until February 1, 2009
Weekly Occurring Event:
(RTE T 2009/01/01 23:00:00 2009/03/01 W 1 "SSu" "description" "(PWR 0)") - power off the projector every
week, on Saturday and Sunday at 23:00:00, starting from January 1, 2009 until March 1, 2009 (inclusive)
(RTE T 2009/01/01 23:00:00 2009/03/01 W 2 "MTWThF" "description" "(PWR 1)") - power on the projector
every other week, on every weekday at 23:00:00, starting from January 1, 2009 until March 1, 2009 (inclusive)
(RTE T 2009/01/01 23:00:00 2009/03/01 W 5 "MTWThF" "description" "(PWR 1)") - power on the projector
every fifth week, on every weekday at 23:00:00, starting from January 1, 2009 until March 1, 2009 (inclusive)
Monthly Occurring Event:
(RTE T 2009/01/1 23:00:00 2010/01/01 M 1 "description" "(PWR 0)") - power off the projector on the 1st day of
every month at 23:00:00, starting January 1, 2009 until January 1, 2010 (inclusive)
(RTE T 2009/01/10 23:00:00 2010/01/01 M 12 "description" "(PWR 0)") - power off the projector on the 12th
day of every 12 months at 23:00:00, starting January 12, 2009 until January 1, 2010 (inclusive)
(RTE T 2009/01/31 23:00:00 2010/01/01 M 2 "description" "(PWR 0)") - power off the projector every other
month on day 31 starting January 31, 2009 until January 1, 2010 (inclusive)
Function Key Events:
(RTE F 1 "description" "(LSH 0)") - open the shutter if Func+1 is pressed on the remote.
(RTE F 2 "description" "(LSH 1)") - close the shutter if Func+2 is pressed on the remote.
System Events:
(RTE S 1 1 "description" "(CLE 5)") - change color to cyan when system powers up.
GPIO Events:
(RTE G "XXXXXXX" "description" "(PWR 1)") Turn ON the projector if we receive any GPIO Input.
(RTE G "" "description" "(PWR 1)") Turn ON the projector if we receive any GPIO Input.
(RTE G "XX" "description" "(PWR 1)") Turn ON the projector if we receive any GPIO Input.
(RTE G "XXXXXLH" "description" "(PWR 0)") Turn OFF the projector if pin 6 is set to low and pin 7 is high.
(RTE G "HH" "description" "(FRZ 0)") Freeze the image if pins 1 and 2 are set to high.
(RTE G "XXHHXXH" "description" "(FRZ 0)") Freeze the image if pins 3,4,7 are set to high.
(RTE G "LLHXX" "description" "(FRZ 0)") Freeze the image if pins 1,2 are set to Low and pin 3 is set to high.
(RTE G "LLH" "description" "(FRZ 0)") Freeze the image if pins 1,2 are set to Low and pin 3 is set to high.

Select Input (SIN)

SIN
Preference
CONTROL GROUP:
Description
Selects the active input. The projector has two input DVI connectors and two video paths. This control assigns
which video path uses which DVI input. The parameter value designates interface followed by a 1. To select DVI 1
use 11. To select DVI 2 use 21.
Subcode
MAIN
SECD
Examples:
(SIN 11) Set main video to DVI connector 1.
(SIN 21) Set main video to DVI connector 2.
(SIN+SECD 11) Set secondary video to DVI connector 1.
(SIN+SECD ?) Report which DVI connector routes secondary input.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Down
SUBCLASS:
Description of Use
Set the active Input for the main video.
Set the active Input for the secondary video.
Serial Command Reference
Operator
ACCESS LEVEL:
98