Replacing A Cooling Unit Fan Or Blower - Promise Technology VTRAK E610f Product Manual

Figure 2. Replacing an E310f/s power supply
This completes the power supply replacement procedure.

Replacing a Cooling Unit Fan or Blower

The fan or blower in each cooling unit is replaced as an individual part. No tools
are required for this procedure.
To replace a fan or blower:
1. Verify that the Fan LED on the cooling unit is amber or red. See Figure 3.
Figure 3. Fan LED (left: E610f/s, right: E310f/s)
Fan LED
2. On the cooling unit, press the release button and pull the handle downward.
See Figure 4 (E610f/s) or 5 (E310f/s).
3. Pull the cooling unit out of the VTrak enclosure.
219
Chapter 6: Maintenance
Fan LED