Managing Disk Arrays
Disk Array Management includes the following functions:
•
Viewing Disk Arrays (page 121)
•
Creating a Disk Array (page 121)
•
Deleting a Disk Array (page 125)
•
Viewing Disk Array Information (page 126)
•
Making Disk Array Settings (page 127)
•
Creating a Logical Drive (page 127)
•
Deleting a Logical Drive (page 129)
•
Migrating a Disk Array (page 129)
•
Rebuilding a Disk Array (page 130)
•
Running PDM on a Disk Array (page 131)
•
Transitioning a Disk Array (page 132)
•
Preparing a Disk Array for Transport (page 132)
Viewing Disk Arrays
To view the disk arrays in this enclosure plus any expanded or cascaded
enclosures:
1.
Click the Subsystem
2.
Click the Disk Arrays
A list of disk arrays appears in Management View.
Click the DA link to view a specific disk array. See "Viewing Disk Array
Information" on page 126.
Creating a Disk Array
The CLU provides three methods of creating a disk array:
•
Automatic – Creates a default disk array and logical drive based on
unconfigured physical drives in the system. No user choices. See "Creating
a Disk Array – Automatic" on page 122.
•
Express – You select the RAID characteristics and type of application.
Creates a disk array and logical drive(s) based on your input. See "Creating
a Disk Array – Express" on page 122.
•
Advanced – You specify all parameters for a new disk array. One logical
drive will be made automatically when you create the disk array. If you select
less than the total available capacity, you can use the remaining space to
create additional logical drives at a later time. See "Creating a Disk Array –
Advanced" on page 123.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
121