VTrak J830s, J630s Product Manual
The system returns:
-------------------------------------------------------------------
Time Since Power Up : 0 days 0 hours 1 minute 45 seconds
Enclosure
Serial Number
I/O Module ID
Firmware Version
Slot 24
CN#1
CN#2
PSU ID
=============================
PSU 01
PSU 02
Because the new I/O module is installed in the right slot, it automatically
takes ID 2 and the Secondary role under enclosure information.
8.
Disconnect your serial cable from the new I/O module.
Replacing a Power Supply Fan
The power supply fans cool the VTrak enclosure as well as the power supplies
themselves. If a power supply fan fails, replace the fan assembly as soon as
possible. Contact Promise Technical Support for replacement parts. See
page 44.
: SBB SAS 6G JBOD 4U-24 Bay
: S987123
: 2
: 6.00.0000.32
No Device Attached
50 0E 00 4A 00 BD 22 55
50 0E 00 4A 00 BD 22 3F
Shutdown Event
AC loss
AC loss
The electronic components within the VTrak are sensitive to
damage from Electro-Static Discharge (ESD). Observe
appropriate precautions at all times when handling the VTrak or its
subassemblies.
Max I/O Module Cnt
I/O Module Role
•
•
•
Warning
52
: 2
: Secondary