Shutting Down the Subsystem
You can only do part of this function in WebPAM PROe. Additional action is
required, as described below. To shutdown the subsystem:
1.
Click the Subsystem
2.
Click the Administrative Tools
3.
Click the Shutdown link in Management View.
A Shutdown or Restart tab will appear.
4.
On the Shutdown or Restart tab, select Shutdown from the dropdown menu.
5.
Click the Submit button.
6.
In the confirmation box, type the word confirm in the field provided.
7.
Click the OK button.
When the controller shuts down, your WebPAM PROe connection will be
lost.
8.
Wait for no less than two minutes.
9.
Manually turn off the power supply switches the back of the subsystem.
Monitoring the Shutdown
To monitor a shutdown, you must use the Command Line Interface (CLI) though
a serial connection to the VTrak.
At the "administrator@CLI>" prompt, type shutdown -a shutdown.
When the "Shutdown complete. It is now safe to power off the subsystem."
message appears, turn off the power supply switches.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
103