Setting Subsystem Date And Time; Viewing The Runtime Event Log - Promise Technology VTRAK E610f Product Manual

2. In Management View, click the Settings tab.
3. Do one of the following actions:
• To enable Cache Mirroring, check the Cache Mirroring box.
• To disable Cache Mirroring, uncheck the Cache Mirroring box.
4. Click the Submit button.
5. Restart the subsystem.
See "Restarting the Subsystem" on page 104.

Setting Subsystem Date and Time

To set a Date and Time for this subsystem:
1. In Tree View, click the Subsystem
2. In Management View, click the Settings tab dropdown menu and select Date
and Time Settings.
3. Under Subsystem Date, select the Month and Day from the dropdown
menus.
4. Type the current year into the Year field.
5. Under Subsystem Time, select the Hour, Minutes and Seconds from the
dropdown menus.
6. Click the Submit button.

Viewing the Runtime Event Log

Runtime Events lists information about the 1023 most recent runtime events
recorded since the system was started. To view runtime events:
1. In Tree View, click the Subsystem
2. In Management View, click the Events tab dropdown menu and select
Runtime Events.
Events are displayed by:
• Item Number – A consecutive decimal number assigned to a specific
event
• Device – Battery, controller, logical drive, physical drive, port, etc.
• If you disable Cache Mirroring, LUN Affinity will be enabled
automatically.
• If you change Cache Mirroring, be sure both controllers are
properly installed in the subsystem before you restart.
Chapter 4: Management with WebPAM PROe
Notes
icon.
icon.
63