Promise Technology VTRAK E610f Product Manual page 297

Reported Event
PSU is not inserted/has
been removed
PSU is off
PSU is on
PSU is installed/
operational and turned on
PSU is installed/
operational and turned off
PSU is malfunctioning
and turned on/off
PSU 12V/5V/3.3V power
is out of the threshold
range
PSU 12V/5V/3.3V power
is within the range
PSU Fans
PSU fan has turned on.
PSU fan has turned off.
PSU fan speed increased. Check the VTrak for overheating. See page 295.
PSU fan speed
decreased.
PSU fan is malfunctioning Replace the power supply. See page 218.
PSU fan is functioning
normally
PSU fan status is
unknown.
RAID Level Migration
RAID Level migration is
started
RAID Level migration is
completed
A power supply unit is missing from the VTrak.
Reinstall the power supply unit.
A power supply unit is present but turned off. Turn on
he power supply.
Normal.
Normal.
A power supply unit is present but turned off. Turn on
he power supply.
Replace the power supply unit.
Replace the power supply unit.
Normal.
Normal.
Verify that the power supply is turned on. If the fan
still does not turn, replace the power supply. See
page 218.
Temporary overheat condition was corrected.
Normal.
Check for airflow out of the power supply. If there is
none, check for proper installation and turn the power
supply on.
Result of settings or user action. Normal.
Normal.
283
Chapter 8: Troubleshooting
Corrective Action