Promise Technology VTRAK E610f Product Manual page 299

Reported Event
Rebuild marks logical
drive synchronized upon
rebuild completion
Redundancy Check
Redundancy Check is
started
Redundancy Check is
completed
Redundancy Check is
paused
Redundancy Check is
resumed
Redundancy Check is
stopped
Redundancy Check is
aborted due to internal
error
Redundancy Check
encountered inconsistent
block(s)
Redundancy Check task
is queued
Redundancy Check task
is stopped internally
Resource
Resource is NOT
available
Spare Check
Spare check started on
the given spare drive
Result of successful rebuild. Normal.
Redundancy Check has started manually or by
schedule.
Redundancy Check has finished.
Redundancy Check paused because of user
intervention, schedule or a higher priority background
activity.
Redundancy Check has resumed again after a
pause.
Redundancy Check stopped because of user
intervention, schedule or the logical drive was deleted
or went critical or offline.
System resources are low. Reduce system load or
restart the VTrak. See page 215.
Check the logical drive's inconsistent block table. See
page 138. Rebuild the disk array if necessary.
page 130.
Redundancy Check has been set manually or by
schedule.
The logical drive is offline. See page 289.
System resources are low. Reduce system load or
restart the VTrak. See page 215.
Result of settings or user action. Normal.
285
Chapter 8: Troubleshooting
Corrective Action