Using Webpam Proe Over The Internet; Obtaining A Security Certificate - Promise Technology VTRAK E610f Product Manual

Using WebPAM PROe over the Internet

The above instructions cover connections between VTrak and your company
network. It is also possible to connect to a VTrak from the Internet.
Your MIS Administrator can tell you how to access your network from outside the
firewall. Once you are logged onto the network, you can access the VTrak using
its IP address.
While only a Fibre Channel or SAS-capable PC can read and write data to the
logical drives on the VTrak, other PCs can monitor the VTrak from virtually any
location.

Obtaining a Security Certificate

Promise Technology provides a default security certificate for the web server as
well as for internal data communication. However, in most cases it is better to
install and verify your own certificate. And, if possible, verify your certificate
through a certificate authority, such as Verisign or Thwate. See your MIS
Administrator for guidance.
To download your security certificate to WebPAM PROe, see "Making Web
Server Settings" on page 91.
49
Chapter 3: Setup