Viewing Fibre Channel Port Statistics; Viewing Sfp Information - Promise Technology VTRAK E610f Product Manual

Port Setting Information
The table below shows the type of attached topology you will achieve based
on your connection type and the configured topology you select.
Connection Type
Switch
Direct
Example 1: If you connect the VTrak to a Fibre Channel switch and select
NL-Port topology, you will create a Public Loop attached topology.
Example 2: If you have a Point to Point attached topology, you made a direct
connection (no switch) and selected N-port topology.

Viewing Fibre Channel Port Statistics

To view statistics for the Fibre Channel ports:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the Fibre Channel Management
4. Click the Statistic tab in Management View.
The statistics for all Fibre Channel ports are shown.
Clearing Statistics
To clear statistics, see "Clearing Statistics" on page 102.

Viewing SFP Information

SFPs (small form-factor pluggable) transceivers connect the ports the VTrak
controllers to the Fibre Channel fabric.
To view SFP information:
Fibre Channel Attached Topology
In some cases, HBA settings to N-Port only work if connected to
the switch. Refer to your HBA manual for more information.
icon in Tree View.
Chapter 4: Management with WebPAM PROe
Configured Topology
N-Port
Fabric Direct
Point to Point
Note
icon.
icon.
81
NL-Port
Public Loop
Private Loop