Adding An Initiator - Promise Technology VTRAK E610f Product Manual

To view a list of recognized initiators:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the Fibre Channel Management
4. Click the Initiator tab in Management View.
A Fibre Channel switch will also display as an initiator in the list. If your Host
PC's Fibre Channel HBA is connected to the VTrak directly (not though a
Fibre Channel switch), the initiator will NOT display in the initiator list.

Adding an Initiator

To add an initiator to the VTrak's initiator list:
1. Check the box to the left of the initiator.
2. Click the Add to Initiator List button.
The initiator appears under Storage Services. See page 87. You can then use the
initiator to create a LUN. See "Adding a LUN Map" on page 88.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon.
83