VTrak E-Class Product Manual
Working with the Event Viewer
The Event Viewer displays log of subsystem events. Events are classified as:
•
Runtime Events – A list of and information about the 1023 most recent
runtime events recorded since the subsystem was started
•
NVRAM Events – A list of and information about most important events over
multiple subsystem startups. NVRAM events are stored in non-volatile
memory
Working with the Event Viewer includes the following functions:
•
Viewing Runtime Events (page 188)
•
Clearing Runtime Events (page 188)
•
Viewing NVRAM Events (page 188)
•
Clearing NVRAM Events (page 189)
Viewing Runtime Events
To display Runtime Events:
1.
From the Main Menu, highlight Event Viewer and press Enter.
The log of Runtime Events appears. Events are added to the top of the list.
Each item includes:
•
Sequence number – Begins with 0 at system startup.
•
Device – Disk Array, Logical Drive, Physical Drive by its ID number.
•
Severity – (lowest to highest) Information, Warning, Minor, Major,
Critical and Fatal
•
Timestamp – Date and time the event happened.
•
Description – A description of the event in plain language.
2.
Press the up and down arrow keys to scroll through the log.
Clearing Runtime Events
To clear the Runtime Event log:
1.
From the Main Menu, highlight Event Viewer and press Enter.
2.
Highlight Clear Runtime Event Log and press Enter.
3.
Press Y to confirm.
Viewing NVRAM Events
This screen displays a list of and information about 63 most important events
over multiple subsystem startups.
To display NVRAM events:
188