Managing Fibre Channel Connections
This feature pertains to VTrak Fibre Channel models. Functions include:
•
Viewing Fibre Channel Node Information (page 79)
•
Viewing Fibre Channel Port Settings (page 79)
•
Making Fibre Channel Port Settings (page 80)
•
Viewing Fibre Channel Port Statistics (page 81)
•
Viewing SFP Information (page 81)
•
Viewing Fibre Channel Logged-in Devices (page 82)
•
Viewing Fibre Channel Initiators (page 82)
Viewing Fibre Channel Node Information
To view Fibre Channel node information:
1.
Click the Subsystem
2.
Click the Administrative Tools
3.
Click the Fibre Channel Management
4.
Click the Node tab in Management View.
The current node (data port) settings the Controller are shown, including:
•
WWNN – World Wide Node Name
•
Supported Features – Class of service
•
Maximum Frame Size – 2048 bits
•
Supported Speeds – 4 Gb/s, 2Gb/s, or 1 Gb/s
Viewing Fibre Channel Port Settings
To view the current Fibre Channel port settings:
1.
Click the Subsystem
2.
Click the Administrative Tools
3.
Click the Fibre Channel Management
4.
Click the Port tab in Management View
The current data port settings the Controller are shown, including:
•
State – Online, Offline, Unknown
•
Port Identifier – A hexadecimal name for this port
•
Topology Attached – See the table on page 81
•
Fabric WWNN – World Wide Node Name (appears when connected to a
switch)
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon.
icon in Tree View.
icon.
icon.
79