Making Fibre Channel Port Settings - Promise Technology VTRAK E610f Product Manual

VTrak E-Class Product Manual
• Fabric WWPN – World Wide Port Name (appears when connected to a
switch)
• Current Speed – 4 Gb/s, 2 Gb/s, or 1 Gb/s
• Link Type – Long-wave laser, short-wave laser or electrical
• Symbolic Name – A text name for this port
• Link Speed* – 4 Gb/s, 2 Gb/s, 1 Gb/s, or Auto
• Topology* – NL-Port, N-Port, or Auto
• Hard ALPA* – Address can be 0 to 254. 255 means this feature is
disabled
• Alias WWPN
* Denotes items that you can change under Port Settings, below.

Making Fibre Channel Port Settings

To make Fibre Channel port settings:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the Fibre Channel Management
4. Click the Port tab in Management View
5. Click the Port1 or Port2 link in Management View.
6. Make the settings appropriate to your system. See "Port Setting Information"
on page 81.
• Configured Link Speed – 4 Gb/s, 2 Gb/s, 1 Gb/s or Auto (self-setting)
• Configured Topology – N-Port (Point-to-Point), NL Port (Arbitrated Loop)
or Auto (self-setting)
• Hard ALPA – Address can be 0 to 254. 255 means this feature is
disabled. An ALPA identifies a port in an arbitrated loop.
7. Click the Submit button to save your settings.
icon in Tree View.
icon.
icon.
80