Vtrak Is Beeping - Promise Technology VTRAK E610f Product Manual

VTrak E-Class Product Manual

VTrak is Beeping

VTrak's alarm has five different patterns, as shown below.
Figure 1. Audible alarm sound patters
1x
1
.25s .25s .25s
2
.25s .75s .25s
3
.25s .5s .25s
4
.25s .25s .25s .5s .25s
5
When you first power-up the VTrak, it beeps twice to show normal operation.
The audible alarm sounds at other times to inform you that the VTrak needs
attention. But the alarm does not specify the condition. When the alarm sounds:
• Check the front and back of VTrak for red or amber LEDs, as described
above.
• If email notification is enabled, check for new messages.
• Check for yellow !s red Xs
• Check the event log. See page 63 (WebPAM PROe) or page 188 (CLU).
When a continuous tone sounds, there are multiple alarm patterns sounding at
the same time.
To make alarm settings or cancel an alarm, see page 114 (WebPAM PROe) or
page 212 (CLU).
.75s .25s 2.5s
.75s .25s 1s
6s
.25s 1.25s .25s
s
in Tree View (see page 271).
262
2x
3s