VTrak E-Class Product Manual
Updating the Firmware in the CLU
A firmware update consists of the following actions:
•
Downloading the Firmware Image File (page 216)
•
Updating the Firmware (page 216)
•
Restarting Subsystem over a Telnet Connection (page 216)
•
Restarting Subsystem over a Serial Connection (page 217)
Downloading the Firmware Image File
Go to the Promise website at
latest firmware image file to your TFTP server.
Updating the Firmware
To update the firmware file in the CLU:
1.
From the Main Menu, highlight Additional Info and Management, and press
Enter.
2.
Highlight Flash through TFTP and press Enter.
3.
Highlight TFTP Server and type the IP address of your TFTP server in the
field provided.
4.
Highlight Port Number and press the backspace key to erase the current
value, then type the new value. 69 is the default.
A list of the current users appears.
5.
Highlight File Name and type the file name of the firmware image file in the
field provided.
6.
Highlight Start and press Enter.
A message appears to tell you to reboot the VTrak.
7.
Restart the VTrak.
See "Restarting Subsystem over a Telnet Connection" on page 216 or
"Restarting Subsystem over a Serial Connection" on page 217.
Restarting Subsystem over a Telnet Connection
To restart the VTrak subsystem on a Telnet connection:
http://www.promise.com/support
Do not restart the VTrak during a firmware upgrade procedure.
Wait until the upgrade is one and you are prompted to restart.
Warning
216
and download the