Promise Technology VTRAK E610f Product Manual page 111

Deleting Netsend Recipients
To delete a Netsend recipient:
1. Highlight the recipient you want to delete in the recipient list.
2. Click the Delete button to remove the recipient from the list.
3. Click the Submit button.
4. Click OK in the confirmation box.
Changing the Startup Setting
1. Under Startup Type:
• Click on the Automatic option to start the service automatically during
system startup. Recommended if you plan to use this feature.
• Click on the Manual option to start the service manually (the service
does not start during system startup). The default setting.
2. Click on the Submit button.
Stopping Netsend service
To stop the Netsend service:
1. Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting Netsend service
To start or restart the Netsend service, click the Start or Restart button.
Netsend Requirements
In order to use Netsend:
• Netsend must be running the VTrak
• You must provide the IP address for each recipient PC
• The Messenger service must be running on each recipient PC
If your Netsend and Messenger service settings are correct but the recipient PC
does not receive event messages, check the recipient PC's Firewall settings.
Refer to your OS documentation for more information.
Chapter 4: Management with WebPAM PROe
97