Promise Technology VTRAK E610f Product Manual page 282

VTrak E-Class Product Manual
Figure 8. The VTrak E610f/E310s controller LEDs
Mgmt
UPS
115200
8 N 1
Status LED
Dirty Cache LED
Under normal conditions, the Controller Status LED (marked with icon) is
green and the Dirty Cache LED (marked with ) icon is dark. See the table
below.
State
LEDs
Flashing
Dark Green Amber
Amber
Status no power OK Error
Unsaved data
Dirty Cache OK OK
in cache
If the Controller Status LED is amber, restart the VTrak. See "Restarting the
Subsystem" on page 104 or page 211.
If the Controller Status LED continues to display amber after startup, contact
Promise Technical Support. See "Contacting Technical Support" on page 305.
The Dirty Cache LED flashes during input/output operation. If the LED shines
amber and the power is off, there is unsaved data in the cache. Do NOT power
down the VTrak while this LED is on. See "Browser Does Not Connect to
WebPAM PROe" on page 301 for more information.
268